IGS “Bias & Ambiguity Resolution” Holds Its 2026 Virtual Annual Workshop
At 20:00 Beijing time (12:00 UTC) on October 29, 2026, the IGS Bias and Ambiguity Resolution (BAR) Committee held its 2026 Virtual Annual Workshop. The meeting was co-chaired by BAR Chair Jianghui Geng of the PRIDE team and Vice Chair Lotfi Massarweh of Delft University of Technology. More than 50 experts and researchers in GNSS precise positioning and time/frequency metrology participated from around the world. Under the themes “Towards Consistent and Interoperable Clock/Bias Products” and “Clock/Bias Product Validation, Continuity and Applications”, the workshop reviewed annual progress in all-frequency products, continuity across day boundaries and their applications. The minute and slides could be accessed from https://igs.org/wg/bias-and-ambiguity-resolution/#meetings.

In his presentation “Towards all-frequency capability: the latest progress of IGS BAR”, Geng focused on the consistency of all-frequency products and the BDS-3 reference-signal transition. He explained that all-frequency capability depends on consistency among satellite clocks, code biases, phase biases and antenna correction models, enabling consistent precise point positioning with ambiguity resolution (PPP-AR) results across eligible combinations of signals and observables. He reviewed the completed transition to B1C/B2a reference signals within BAR and approaches used by some analysis centers to generate compatible all-frequency products from B1I/B3I. In daily static positioning tests at 136 globally distributed stations, these all-frequency products yielded results comparable to those obtained with products estimated directly from B1C/B2a, demonstrating compatibility between the different product generation approaches.
To address discontinuities in precise products at day boundaries, Geng presented PRIDE DBAlign, a tool for aligning orbit, clock and bias products across day boundaries. Examples showed that the aligned products improved continuity in multi-day kinematic positioning and time transfer. He also noted that the availability of clock estimates at the day-boundary epoch is an important factor in alignment quality.
Kyohei Akiyama of the Japan Aerospace Exploration Agency (JAXA) introduced new JGX products for PPP-AR. Giulio Tagliaferro of the International Bureau of Weights and Measures (BIPM) presented the use of continuous precise products for multi-day PPP-AR clock estimation. Francisco Ortega of the University of Chile introduced GeoSismos, an open platform built around PRIDE PPP-AR.
The discussions focused on product consistency and integrity. Key topics included compatible correction models, particularly satellite antenna models; a possible future transition in GPS reference frequencies and support for L5; the correspondence between satellite clock reference-frequency combinations and bias products; and the potential use of integrity metrics alongside accuracy assessments. Participants emphasized the need to improve product interoperability and coordinate reference-signal choices while allowing analysis centers to retain different estimation methods. These issues require further research.
The workshop highlighted applications of IGS BAR products in continuous multi-day time transfer and crustal deformation monitoring. It also identified open questions concerning product interoperability, continuity across day boundaries and reference-signal coordination, providing a basis for further research and exchanges between analysis centers and users.
时间:2026-11-08
浏览:39